Friday, October 26, 2012

The Personal 3D Printer is Here


 
The Personal 3D Printer is Here
Published on Yanko Design | shared via feedly

The ultra-compact XEOS 3D printer integrates perfectly into smaller office spaces that lack the capacity for larger printers, CNC mills and turning lathes. The use of a new innovative printer arm inspired by a wafer robot arm reduces enclosure volume by 66% compared to the current smallest design available. Create and verify geometric forms in no time, straight from the desktop!

The clean interior and transparent two window design creates a "stage" for the printing process and emphasizes on the fascination people get when they are watching an object appears out of nothing.

The design also features easy and intuitive controls and step-by-step software supports Macs / PCs and Pads, which connect to the printer via WIFI. The software takes the user by the hand and helps even first time users.

The device itself features only one "stop and open" hardware button on the outside to simplify controls and avoid overloading with functions. The printer automatically goes in standby-mode after 15 minutes and wakes up when the next print job is received. A large LED status bar behind the front glass gives visual feedback about the print progress and is easy to read – even from across the room.

Designer: Stefan Reichert

-
Yanko Design
Timeless Designs - Explore wonderful concepts from around the world!
Yanko Design Store - We are about more than just concepts. See what's hot at the YD Store!
(The Personal 3D Printer is Here was originally posted on Yanko Design)

Related posts:

  1. Insect Printer
  2. Disposable Printer
  3. Reverse Printer



Monday, October 22, 2012

London 3D Printshow


 
London 3D Printshow
Published on NOTCOT | shared via feedly

13dprint00.jpg Here's the latest from our London based editor, Justine Aw, sharing her discoveries at the first London 3D Printshow - she came back with lots of pics, and our NOTlabs director, Shawn Sims will help explain it all below!

We've been following 3D printing closely as it picks up momentum faster than ever the last year… I made my first 3D print back in 2006 at Pratt, and have been fascinated since. We printed the F.U.C.K. Adapters with an Objet which uses a method called Stereolithography, also known as SLA. This particular process uses a photosensitive resin or liquid that is hardened into place by ultraviolet light. Recently we unboxed the Makerbot Replicator which uses a technique called Fused Deposition Modeling or FDM. It works by squeezing out a thin heated filament, usually plastic, which hardens once extruded. These two methods make up nearly all of the DIY and desktop 3D printers that you have been seeing. This week has been quite the week for 3D printing, with both the Shapeways Factory of the Future opening in NYC as well as the London 3D Printshow!

The 3D Printshow is a unique mix between a hardware trade show and an art gallery of selected works from sculptors, jewellery designers, animation and interactive artists all working with 3D form. We even got to see the much anticipated Form 1 3D Printer from the Kickstarter superstar FormLabs of MIT in person. It is great to see how they are bringing the art of 3D printing to the masses, helping it transcend being a prototyping/manufacturing level tool… perhaps it could truly become a reality for every home to have one much like an ink printer in the near future. Check out the variety of 3D printers and art pieces we saw on the next page!

TO PAGE 2 of "London 3D Printshow"! ----->

(Want more visual goodness? See NOTCOT.com + NOTCOT.org)

Wednesday, October 17, 2012

Evidence mounts for 32GB Nexus 7, same price as 16GB original


 
Evidence mounts for 32GB Nexus 7, same price as 16GB original
Published on The Verge | shared via feedly
nexus7stock

A listing in UK retailer Argos' Christmas Gift Guide indicates that Google and Asus will soon release a 32GB version of the Nexus 7. The tablet is labeled as costing £199.99, matching the current price of the 16GB variant in the UK. Android Police has also posted details of the 32GB model, with a listing on Staples' website showing the higher-capacity version commanding a $248 price compared to the current $250 cost of the 16GB variant. The timeline for the release of the higher capacity tablet isn't clear, however: The Next Web was told "not to expect it in the next two weeks," while the October 18th date on Staples' listing looks to be a placeholder.


Continue reading…


Saturday, October 13, 2012

An Interview With Josh Bechtel, The Inventor Of The Bicymple


 
An Interview With Josh Bechtel, The Inventor Of The Bicymple
Published on TechCrunch | shared via feedly
rooftop3

There's been quite a bit of disruption in bikes recently and the Bicymple is no exception. Designed by Josh Bechtel, the bike aims to be easy to ride, trouble free, and less expensive than traditional gear and chain models. You can check out a video here but we got a chance to talk with Josh a bit about his new design.

TC: What's the impetus for this?

Josh: Ultimately, my passion for bicycles is the driving force behind the Bicymple. I've been riding bikes regularly since I was a child. I have more bikes than I care to admit to strangers on the web and people I've only just met. It's a problem. I love cross country bikes, downhill bikes, road bikes, single speeds, fixies, cruisers, city bikes, clean bikes, rusty bikes, light bikes, heavy bikes…shall I go on? I think unicycles are great, too!

I built my first home-built bike back in the late 90′s. It was a traditional full suspension bike and I even successfully raced it. At the time, you could get away with that sort of thing, but as bike technology and building methods and materials advanced, it became tougher and tougher to compete in that way–especially for an average guy with a full time job and bills to pay. When the movement toward minimalist bikes came back around, it revitalized the bike builder in me and got me thinking about ways I could leave a mark, no matter how small it might be, in the world I am so passionate about. I started riding a single speed with a coaster brake that I had built up mostly out of used parts and it just made me so happy it got me thinking about how far one might be able to go in that direction. I started with a sketch of a standard bike and began crossing off parts one by one and addressing the problems created with each deletion until I ended up with a direct drive, freewheeling bike. From there, I felt like it might actually have become too simple. I felt it needed something else–a surprise in its back pocket–and the rear-steer was just the solution. I fully realize the contradiction this presents with the concept of simplicity and like the tension that creates.

TC: Is this the first bike of this particular type? I seem to remember seeing something like this before, but why this style and why now?

Josh: Yes and no. There have been swing bikes before, for certain, but they were all chain driven. There have been direct drive bikes before, too, but none (as far as I'm aware) had any lockout mechanism for the rear steering and they were all non-freewheeling and had smaller wheels, which severely limited their real-world practicality and left them in a purely "trick-bike" niche. I imagine most are familiar with the old penny farthing, too, and there are obvious connections there, too.

The bicymple might, however, bring these previous concepts together in a way that hasn't been seen before. There seems to be a misconception out there on the web that I think that the established bicycle design is somehow lacking or insufficient, but that's simply not the case. To me, that would be like thinking that anyone who ever picked up a paintbrush thought that Michelangelo just couldn't hack it. I think that idea is a bit silly, really. The bicymple provides yet another outlet, another opportunity to accomplish the same goals as many other bikes, it just does it in a different way! Part of what makes life so great, in my mind, is diversity–and the bicycle world is a great example of this!

TC: What did you have to change to get it work properly? Is it really like a unicycle with another wheel? Something else?

Josh: At first glance, especially when you see someone riding it, it's easy to see the similarities with a unicycle. Right away "the two-wheeled unicycle" became a nickname for it and the obvious oxymoron created by that name is pretty entertaining to me. It's actually how I tend to explain it to those who haven't seen it. The things that set it apart and make it special are obviously the rear steering, but also the fact that the rear steering can be locked out, allowing it to be ridden just like a regular bike. Many comments out there on the web overlook this key fact. It's one of the subtle surprises that the bicymple has up its sleeve. The overdrive hub is another surprise. It is currently in development and has caught the attention of many in both the bicycle and unicycle communities. The classic thinking is that the only way to go faster with a direct coaxial drive is to increase the size of the wheel, which was the famous fatal flaw of the penny farthing. A few clever designs out there for unicycles have gotten around this but at quite a price. We'll be able to accomplish the same goal at a price that should be quite affordable. It's a compact, sealed, zero-service unit so you'll never have to think about it–and it certainly won't get your pants leg greasy!

TC: How much does it cost to build? How much was your prototype?

Josh: We're not addressing dollar amounts until we're able to offer an accurate
retail price.

TC: Bummer. When will you be ready to build some? Will you sell it via Kickstarter?

Josh: Our plan from the start has been to get an initial run built and provide them as test bikes to select bike shops. The incredible support and enthusiasm and sheer number of purchase requests from around the globe has made us consider a different approach. There is a very good chance we will be on Kickstarter in the coming weeks. Stay tuned for that. Crowdfunding is such a fantastic way for people to get their hands on products they never would have been able to before, so we'd be silly to not pursue that.

TC: What would you say to people who say it looks pretty goofy? Does it look as weird as those recumbent bikes?

Josh: I think it's great if people think it looks goofy! I think it looks goofy too! It's just not something many of us are accustomed to seeing. Ultimately, though, many, many people have expressed a great deal of interest and think it is a beautiful sort of goofy. From the first sketches, that's how I felt about it. Wait, recumbent bikes look goofy?

TC: Have you ridden around on this in Bellingham? What do people think?

Josh: Oh yes, the bicymple has been out and about plenty. The reception has all been incredibly positive. I get yells from people across the street, from over fences and through windows, all curious and wanting to understand what it is they're looking at. It is certainly eye-catching and incredibly unique. Those who are adventurous love the fact that the rear can be set loose to swing freely and really like the challenge it presents. Those less adventurous appreciate the ability to lock the steering out and pedal normally. I look forward to the bicymple getting in the hands of some really skilled trials riders to see the sorts of things they're capable of doing with it–unicyclists, too! Thanks again, and let me know if you have any other questions!




Tuesday, October 2, 2012

Leaked iPad Mini Photos Show First Look at Black Model, 3G Support


 
Leaked iPad Mini Photos Show First Look at Black Model, 3G Support
Published on Gizmodo | shared via feedly
UkrainianiPhone has some exclusive leaked photos of the 7.85-inch iPad mini, showing its black case for the first time. The photos were allegedly taken by a source "close to Apple production line in China" and they match the previous parts leak, which showed two dock connectors, one in white and the other in black. More »